Local Remote Control Locremctrl - ABB Relion Technical Manual

Section 12
Control
12.2.7
12.2.7.1
12.2.7.2
12.2.7.3
12.2.7.4
370

Local remote control LOCREMCTRL

Identification
Function description
Local remote control
Functionality
The signals from the local HMI or from an external local/remote switch are applied via the
function blocks LOCREM and LOCREMCTRL to the Bay control QCBAY function
block. A parameter in function block LOCREM is set to choose if the switch signals are
coming from the local HMI or from an external hardware switch connected via binary
inputs.
Function block
LOCREMCTRL
^PSTO1 ^HMICTR1
^PSTO2 ^HMICTR2
^PSTO3 ^HMICTR3
^PSTO4 ^HMICTR4
^PSTO5 ^HMICTR5
^PSTO6 ^HMICTR6
^PSTO7 ^HMICTR7
^PSTO8 ^HMICTR8
^PSTO9 ^HMICTR9
^PSTO10 ^HMICTR10
^PSTO11 ^HMICTR11
^PSTO12 ^HMICTR12
IEC09000074_1_en.vsd
IEC09000074 V1 EN
Figure 172: LOCREMCTRL function block
Signals
Table 229: LOCREMCTRL Input signals
Name Type
PSTO1 INTEGER
PSTO2 INTEGER
PSTO3 INTEGER
Table continues on next page
IEC 61850 IEC 60617
identification identification
LOCREMCTRL -
Default Description
0 PSTO input channel 1
0 PSTO input channel 2
0 PSTO input channel 3
1MRK 502 048-UUS A
ANSI/IEEE C37.2
device number
-
Technical manual