Customizing The Login Screen; Configuring Passwords - Siemens RUGGEDCOM ROS User Manual

Chapter 4
System Administration
Parameter
Contact
Click Apply.
3.
Section 4.2

Customizing the Login Screen

To display a custom welcome message, device information or any other information on the login screen for the
Web and console interfaces, add text to the banner.txt file stored on the device. If the banner.txt file is
empty, only the Username and Password fields appear on the login screen.
To update the banner.txt file, download the file from the device, modify it and then load it back on to the
device. For information about uploading and downloading files, refer to
Files".
Section 4.3

Configuring Passwords

ROS allows for up to three user profiles to be configured locally on the device. Each profile corresponds to one of
the following access levels:
• Guest
• Operator
• Admin
The access levels provide or restrict the user's ability to change settings and execute various commands.
Rights
View Settings
Clear Logs
Reset Alarms
Clear Statistics
Change Basic Settings
Change Advanced Settings
Run Commands
Default passwords are configured for each user type initially. It is strongly recommended that these be changed
before the device is commissioned.
102
Description
Synopsis: Any 49 characters
The contact can be used to help identify the person responsible for managing the
switch. You can enter name, phone number, email, etc. It is displayed in the login screen
so that this person may be contacted should help be required.
Guest
ü
û
û
û
û
û
û
Section 3.4, "Uploading/Downloading
User Type
Operator
ü
ü
ü
ü
ü
û
û
Customizing the Login Screen
RUGGEDCOM ROS
User Guide
Admin
ü
ü
ü
ü
ü
ü
ü