Siemens RUGGEDCOM ROS User Manual page 241

RUGGEDCOM ROS
User Guide
Figure 172: Port Trunks Table
1. InsertRecord
2. Click InsertRecord. The Port Trunks form appears.
4
Figure 173: Port Trunks
1. Trunk ID Box
3. Configure the following parameter(s) as required:
Parameter
Trunk ID
Trunk Name
Ports
4. Click Apply.
Adding a Port Trunk
2. Trunk Name Box 3. Ports Box
Description
Synopsis: 1 to 2
Default: 1
Trunk number. It doesn't affect port trunk operation in any way and is only used for
identification.
Synopsis: Any 19 characters
Provides a description of the aggregated link purpose.
Synopsis: Any combination of numbers valid for this parameter
Default: None
List of ports aggregated in the trunk.
5
4. Apply Button 5. Delete Button
Setup and Configuration
6. Reload Button
Chapter 5
1
2
3
6
227