RUGGEDCOM ROS
User Guide
Parameter
Owner
Click Apply.
4.
Section 3.10.2.3
Deleting an RMON Alarm
To delete an RMON alarm, do the following:
1.
Navigate to Ethernet Stats » Configure RMON Alarms. The RMON Alarms table appears.
Figure 56: RMON Alarms Table
2.
Select the alarm from the table. The RMON Alarms form appears.
Deleting an RMON Alarm
Description
The index of the event that is used when a rising threshold is crossed. If there is no
corresponding entryl in the Event Table, then no association exists. In particular, if this
value is zero, no associated event will be generated.
Synopsis: Any 127 characters
Default: Monitor
The owner of this record. It is suggested to start this string withword 'monitor'.
Chapter 3
Device Management
93