Deleting A Static Vlan - Siemens RUGGEDCOM ROS User Manual

Chapter 5
Setup and Configuration
Parameter
4. Click Apply.
Section 5.2.5.3

Deleting a Static VLAN

To delete a static VLAN, do the following:
1. Navigate to Virtual LANs » Configure Static VLANs. The Static VLANs table appears.
Figure 89: Static VLANs Table
2. Select the static VLAN from the table. The Static VLANs form appears.
6
Figure 90: Static VLANs Form
1. VID Box 2. VLAN Name Box
8. Reload Button
3. Click Delete.
136
Description
This parameter is only valid for Multiple Spanning Tree Protocol (MSTP) and has no
effect if MSTP is not used. The parameter specifies the Multiple Spanning Tree Instance
(MSTI) to which the VLAN should be mapped.
3. Forbidden Ports Box 4. IGMP Options
7
5. MSTI Box 6. Apply Button
RUGGEDCOM ROS
User Guide
1
2
3
4
5
8
7. Delete Button
Deleting a Static VLAN