Managing Rmon Events - Siemens RUGGEDCOM ROS User Manual

Chapter 3
Device Management
12
Figure 57: RMON Alarms Form
1. Index Box 2. Variable Box
Alarm List 9. Rising Event Box
3. Click Delete.
Section 3.10.3

Managing RMON Events

Remote Monitoring (RMON) events define behavior profiles used in event logging. These profiles are used by
RMON alarms to send traps and log events.
Each alarm may specify that a log entry be created on its behalf whenever the event occurs. Each entry may
also specify that a notification should occur by way of SNMP trap messages. In this case, the user for the trap
message is specified as the Community.
Two traps are defined: risingAlarm and fallingAlarm.
The following sections describe how to configure and manage RMON events:
• Section 3.10.3.1, "Viewing a List of RMON Events"
• Section 3.10.3.2, "Adding an RMON Event"
• Section 3.10.3.3, "Deleting an RMON Event"
94
3. Rising Thr Box 4. Falling Thr Box
10. Falling Event Box 11. Owner Box
13
5. Value Box 6. Type Options
12. Apply Button 13. Delete Button
RUGGEDCOM ROS
User Guide
1
2
3
4
5
6
7
8
9
10
11
14
7. Interval Box 8. Startup
14. Reload Button
Managing RMON Events