Siemens RUGGEDCOM ROS User Manual page 110

Chapter 3
Device Management
7
Figure 60: RMON Events Form
1. Index Box 2. Type List
8. Delete Button
3. Configure the following parameter(s) as required:
Parameter
Index
Type
Community
Last Time Sent
Description
Owner
4. Click Apply.
96
3. Community Box
9. View Button 10. Reload Button
Description
Synopsis: 1 to 65535
Default: 3
The index of this RMON Event record.
Synopsis: { none, log, snmpTrap, logAndTrap }
Default: logAndTrap
The type of notification that the probe will make about this event. In the case of 'log',
an entry is made in the RMON Log table for each event. In the case of snmp_trap, an
SNMP trap is sent to one or more management stations.
Synopsis: Any 31 characters
Default: public
If the SNMP trap is to be sent, it will be sent to the SNMP community specified by this
string.
Synopsis: DDDD days, HH:MM:SS
The time from last reboot at the time this event entry last generated an event. If this
entry has not generated any events, this value will be 0.
Synopsis: Any 127 characters
Default: EV2-Rise
A comment describing this event.
Synopsis: Any 127 characters
Default: Monitor
The owner of this event record. It is suggested to start this string withword 'monitor'.
8
4. Last Time Sent Box 5. Description Box
RUGGEDCOM ROS
User Guide
1
2
3
4
5
6
9
6. Owner Box 7. Apply Button
Adding an RMON Event