Table of Contents
Advertisement
Assigning Parameters to the FM 450-1
5.1
Installing and Calling Parameter Assignment Screen Forms
Marginal
The following conditions apply for transferring parameter assignment data to
Conditions
the CPU:
Note
You must not plug in or remove any S7-400 modules during data exchange
over the MPI!
Form of Supply
The software is supplied in the form of 3.5" diskettes, MS-DOS operating
system, 1.44 Mbytes. The following information is available on the supply
diskettes:
Creating a Backup
Create a copy of each original diskette and install the parameter assignment
Diskette
screen forms from this copy. Keep the original diskettes in a safe place. See
your MS-DOS description or your WINDOWS description to learn how to
copy diskettes.
Installing the
Call the SETUP.EXE program on the backup copy of your installation dis-
Parameter
kette. This installs not only the parameter assignment screen forms but also
Assignment
FC CNT_CTRL and the FC DIAG_INF on your programming device. The
Screen Forms
FCs are inserted in the standard library in the catalog 'FM_CNT_L'. Follow
the instructions displayed in the SETUP menu on the screen.
Example Program
During installation, a detailed example program is inserted in the
FM_ZAEHL project in the 'Examples' sub-catalog of the STEP 7 catalog.
Reading the
The READ ME file may contain important up-to-date information concern-
READ ME File
ing the software supplied. You can read this file with the WORDPAD Editor
under Windows.
Calling the
The parameter assignment screen forms are displayed automatically after a
Parameter
successful installation, if you parameterize the FM 450-1 within the hardware
Assignment
configuration.
Screen Forms
Calling the Integral
There is an integral Help function for the parameter assignment screen forms
Help Function
that you can call in any phase of parameter assignment either with the F1 key
or with the Help button.
5-2
www.gkbpx.com
STEP 7 must be correctly installed on your programming device
The programming device must be correctly connected to the CPU
The CPU must be in STOP
Diskette format
Diskette number and quantity
Product designation, version and year
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
FM 450-1 Counter Function Module
C79000-G7076-C450-01
Advertisement
Table of Contents
