Device Management; Viewing Product Information - Siemens RUGGEDCOM ROS User Manual

Hide thumbs Also See for RUGGEDCOM ROS:
Table of Contents

Advertisement

RUGGEDCOM ROS
User Guide

Device Management

This chapter describes how to configure and manage the device and its components, such as module interfaces,
logs and files. It describes the following tasks:
NOTE
For information about how to configure the device to work with a network, refer to
Configuration.
Section 3.1, "Viewing Product Information"
Section 3.2, "Viewing CPU Diagnostics"
Section 3.3, "Restoring Factory Defaults"
Section 3.4, "Uploading/Downloading Files"
Section 3.5, "Managing Logs"
Section 3.6, "Managing Ethernet Ports"
Section 3.7, "Managing IP Interfaces"
Section 3.8, "Managing IP Gateways"
Section 3.9, "Configuring IP Services"
Section 3.10, "Managing Remote Monitoring"
Section 3.11, "Upgrading/Downgrading Firmware"
Section 3.12, "Resetting the Device"
Section 3.13, "Decommissioning the Device"
Section 3.1

Viewing Product Information

During troubleshooting or when ordering new devices, Siemens personnel may request specific information about
the device, such as the model, order code or serial number.
To view information about the device, navigate to Diagnostics » View Product Information. The Product
Information form appears.
Viewing Product Information
Chapter 3
Device Management
Chapter 5, Setup and
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents