Viewing Statistics For Global Mstis - Siemens RUGGEDCOM ROS User Manual

Chapter 5
Setup and Configuration
• Section 5.3.9.1, "Viewing Statistics for Global MSTIs"
• Section 5.3.9.2, "Viewing Statistics for Port MSTIs"
• Section 5.3.9.3, "Configuring the MST Region Identifier"
• Section 5.3.9.4, "Configuring a Global MSTI"
• Section 5.3.9.5, "Configuring an MSTI for an Ethernet Port"
Section 5.3.9.1

Viewing Statistics for Global MSTIs

To view statistics for global MSTIs, navigate to Spanning Tree » View Bridge MSTI Statistics. The Bridge MSTI
Statistics form appears.
1
10
Figure 101: Bridge MSTI Statistics Form
1. Instance Box 2. Get Button
8. Total Topology Changes Box
This table displays the following information:
Parameter
Bridge Status
Bridge ID
Root ID
Root Port
160
3. Bridge Status Box 4. Bridge ID Box
Description
Synopsis: { , Designated Bridge, Not Designated For Any LAN, Root Bridge }
Spanning Tree status of the bridge. The status may be root or designated. This field may
show text saying not designated for any LAN if the bridge is not designated for any of its
ports.
Synopsis: $$ / ##-##-##-##-##-## where $$ is 0 to 65535, ## is 0 to FF
Bridge Identifier of this bridge.
Synopsis: $$ / ##-##-##-##-##-## where $$ is 0 to 65535, ## is 0 to FF
Bridge Identifier of the root bridge.
Synopsis: 1 to maximum port number or { <empty string> }
If the bridge is designated, this is the port that provides connectivity towards the root bridge
of the network.
5. Root ID Box 6. Root Port Box
Viewing Statistics for Global MSTIs
RUGGEDCOM ROS
User Guide
2
3
4
5
6
7
8
9
7. Root Path Cost Box