Using The Command Line Interface; Available Cli Commands - Siemens RUGGEDCOM ROS User Manual

Chapter 2
Using ROS
Ctrl + I
Ctrl + L
Ctrl + S
Ctrl + X
Ctrl + Z
Section 2.6

Using the Command Line Interface

The Command Line Interface (CLI) offers a series of powerful commands for updating ROS, generating
certificates/keys, tracing events, troubleshooting and much more. It is accessed via the Console interface by
pressing Ctrl-S.
The following sections describe how to use the Command Line Interface (CLI):
• Section 2.6.1, "Available CLI Commands"
• Section 2.6.2, "Tracing Events"
• Section 2.6.3, "Executing Commands Remotely via RSH"
• Section 2.6.4, "Using SQL Commands"
Section 2.6.1

Available CLI Commands

The following commands are available at the command line:
Command
alarms all
arp
clearalarms
clearethstats [all | port]
clearlogs
clrcblstats [all | port]
32
NOTE
Before exiting a screen, ROS will automatically prompt the user to save any changes that have
not been committed.
Inserts a new record.
Deletes a record.
Opens the CLI interface.
Terminates the current session. This command is only available from the main menu.
Displays important information about the current screen or selected parameter.
Description
Displays a list of available alarms.
Optional and/or required parameters include:
• all displays all available alarms
Displays the IP to MAC address resolution table.
Clears all alarms.
Clears Ethernet statistics for one or more ports.
Optional and/or required parameters include:
• all clears statistics for all ports
• port is a comma separated list of port numbers (e.g. 1,3-5,7)
Clears the system and crash logs.
Clears cable diagnostics statistics for one or more ports.
Optional and/or required parameters include:
• all clears statistics for all ports
RUGGEDCOM ROS
User Guide
Using the Command Line Interface