Viewing And Clearing Latched Alarms - Siemens RUGGEDCOM ROS User Manual

Chapter 4
System Administration
Figure 66: Alarms Table
NOTE
This list of alarms (configurable and non-configurable) is accessible through the Command Line
Interface (CLI) using the alarms. For more information, refer to
Commands".
For information about modifying a pre-configured alarm, refer
Section 4.4.2

Viewing and Clearing Latched Alarms

To view a list of alarms that are configured to latch, navigate to Diagnostics » View Latched Alarms. The
Latched Alarms table appears.
106
Section 2.6.1, "Available CLI
toSection 4.4.3, "Configuring an
Viewing and Clearing Latched Alarms
RUGGEDCOM ROS
User Guide
Alarm".