Siemens RUGGEDCOM ROS User Manual page 228

Chapter 5
Setup and Configuration
1
Figure 160: Static Multicast Groups Table
1. InsertRecord
2. Click InsertRecord. The Static Multicast Groups form appears.
5
Figure 161: Static Multicast Groups Form
1. MAC Address Box
3. Configure the following parameter(s) as required:
Parameter
MAC Address
VID
CoS
Ports
214
2. VID Box 3. CoS List 4. Ports Box
Description
Synopsis: ##-##-##-##-##-## where ## ranges 0 to FF
Default: 00-00-00-00-00-00
Multicast group MAC address.
Synopsis: 1 to 4094
Default: 1
VLAN Identifier of the VLAN upon which the multicast group operates.
Synopsis: { N/A, Normal, Medium, High, Crit }
Default: N/A
Prioritizes traffic for the specified MAC address. To not prioritize traffic based on the
address, select N/A.
Synopsis: Any combination of numbers valid for this parameter
Default: None
Ports to which the multicast group traffic is forwarded.
6
5. Apply Button 6. Delete Button
RUGGEDCOM ROS
User Guide
1
2
3
4
7
7. Reload Button
Adding a Static Multicast Group