Siemens RUGGEDCOM ROS User Manual page 236

Chapter 5
Setup and Configuration
10
Figure 169: 802.1X Parameters Form
1. Port Box 2. tX Period Box
7. suppTimeout Box
3. Configure the following parameter(s) as required:
Parameter
Port
txPeriod
quietPeriod
reAuthEnabled
reAuthPeriod
reAuthMax
suppTimeout
222
3. quietPeriod Box
8. serverTimeout Box 9. maxReq Box
Description
Synopsis: 1 to maximum port number
Default: 1
The port number as seen on the front plate silkscreen of the switch.
Synopsis: 1 to 65535
Default: 30 s
The time to wait for the Supplicant's EAP Response/Identity packet before retransmitting
an EAP Request/Identity packet.
Synopsis: 0 to 65535
Default: 60 s
The period of time not to attempt to acquire a Supplicant after the authorization session
failed.
Synopsis: { No, Yes }
Default: No
Enables or disables periodic re-authentication.
Synopsis: 60 to 86400
Default: 3600 s
The time between periodic re-authentication of the Supplicant.
Synopsis: 1 to 10
Default: 2
The number of re-authentication attempts that are permitted before the port becomes
unauthorized.
Synopsis: 1 to 300
Default: 30 s
The time to wait for the Supplicant's response to the authentication server's EAP packet.
4. reAuthEnabled Options 5. reAuthPeriod Box
10. Apply Button
6. reAuthMax Box
11. Reload Button
Configuring IEEE 802.1X
RUGGEDCOM ROS
User Guide
1
2
3
4
5
6
7
8
9
11