Managing Ip Gateways; Viewing A List Of Ip Gateways - Siemens RUGGEDCOM ROS User Manual

RUGGEDCOM ROS
User Guide
7
Figure 40: IP Interfaces Form
1. IP Address Type Box
3. Click Delete.
Section 3.8

Managing IP Gateways

ROS allows up to ten IP gateways to be configured. When both the Destination and Subnet parameters are
blank, the gateway is considered to be a default gateway.
NOTE
The default gateway configuration will not be changed when resetting all configuration parameters to
their factory defaults.
The following sections describe how to set up and manage IP gateways:
• Section 3.8.1, "Viewing a List of IP Gateways"
• Section 3.8.2, "Adding an IP Gateway"
• Section 3.8.3, "Deleting an IP Gateway"
Section 3.8.1

Viewing a List of IP Gateways

To view a list of IP gateways configured on the device, navigate to Administration » Configure IP Gateways.
The IP Gateways table appears.
Managing IP Gateways
2. IP Address Box 3. Subnet Box
8
4. Apply Button 5. Delete Button
Chapter 3
Device Management
1
2
3
4
5
6
9
6. Reload Button
81