Deleting An Rmon History Control - Siemens RUGGEDCOM ROS User Manual

Chapter 3
Device Management
Parameter
Interval
Owner
4. Click Apply.
Section 3.10.1.3

Deleting an RMON History Control

To delete an RMON history control, do the following:
1. Navigate to Ethernet Stats » Configure RMON History Controls. The RMON History Controls table
appears.
Figure 50: RMON History Controls Table
Select the history control from the table. The RMON History Controls form appears.
2.
88
Description
The number of buckets granted for this RMON collection history. This field is not
editable.
Synopsis: 1 to 3600
Default: 1800
The number of seconds in over which the data is sampled for each bucket. The range is
1 to 3600. The default is 1800.
Synopsis: Any 127 characters
Default: Monitor
The owner of this record. It is suggested to start this string withword 'monitor'.
RUGGEDCOM ROS
User Guide
Deleting an RMON History Control