RUGGEDCOM ROS
User Guide
Section 3.10.3.1
Viewing a List of RMON Events
To view a list of RMON events, navigate to Ethernet Stats » Configure RMON Events. The RMON Events table
appears.
Figure 58: RMON Events Table
If events have not been configured, add events as needed. For more information, refer to
"Adding an RMON
Section 3.10.3.2
Adding an RMON Event
To add an RMON alarm, do the following:
1.
Navigate to Ethernet Stats » Configure RMON Events. The RMON Events table appears.
1
Figure 59: RMON Events Table
1. InsertRecord
2.
Click InsertRecord. The RMON Events form appears.
Viewing a List of RMON Events
Event".
Chapter 3
Device Management
Section 3.10.3.2,
95