Sample Ums Installation Script (Primary Ums Server) - 3Com VCX V7000 Installation And Maintenance Manual

Sample UMS
Installation Script
(Primary UMS Server)
---------------------------------------------------------------------------
---------------------- Initial VCX Configuration --------------------------
---------------------------------------------------------------------------
One or more VCX components in the currently selected VCX version require
initial configuration.
VCX services can be started.
Do you wish to configure VCX at this time?
If you say no, VCX services will not be started, and you will be prompted
again to do this configuration when you reboot.
Configure VCX now? [yes] :
Beginning initial VCX configuration.
Configuring VCX Tomcat Server
Type of VCX 7300 Installation (S-Standalone/C-Client/V-Server)? [S]S
Number of voip ports? [144]
IP address of the outbound proxy? [0.0.0.0] 10.20.30.40
Name of the SIP DDD?
TCP/UDP Port on which the VCX 7300 will receive SIP messages [5060]
After the network installation script has been completed, the UMS
installation script starts. The sample script shown next provides guidance
on how to answer the questions.
This configuration must be completed before any
Press the Enter or Return key to accept yes as the suggested answer.
Press the Enter or Return key to accept S as the suggested answer.
Press the Enter or Return key to accept the default number (144) of VOIP
ports that the system will support. Do not enter a different value without
consulting 3Com.
In previous releases of the VCX software the Call Processor was referred
to as the Call Proxy or Outbound Proxy. Enter the IP address of the
secondary VCX Call Processor.
[10.20.30.40]
The SIP Default Dialing Domain software runs on the same server as the
VCX Call Processor. Press the Enter or Return key to accept the IP address
of the primary VCX Call Processor.
The VCX Call Processor and UMS both use the same port number but on
different IP addresses. Press the Enter or Return key to accept the default
port, 5060.
UMS Installation Script — Primary UMS Server
Installation Scripts 77