Call Processor And Sip Downloader Script (Secondary Server) - 3Com VCX V7000 Installation And Maintenance Manual

50 C 2: I
HAPTER NSTALLATION
Call Processor and SIP
Downloader Script
(Secondary Server)
Enter the hostname of the Authentication Database [localhost]: vcx02
Enter the hostname of the Directory Database [vcx02]:
Starting the 3Com Call Processor configuration...
Please choose the IP address of the Call Processor from the following options:
a) 10.20.30.40
b) 10.20.30.41
c) none of the above
b
The Call Processor is configured to use the following IP: 10.20.30.41
Would you like to keep this address? (y/n) y
Will you be configuring the Back-End Servers used by the Call Processor? (y/n) y
Would you like to configure any Authentication Server? (y/n) y
Please enter the IP Address of the primary Authentication Server: 10.20.30.42
Would you like to add a secondary Authentication Server? (y/n) y
Please enter the IP Address of the secondary Authentication Server: 10.20.30.40
Would you like to configure any Directory Server? (y/n) y
Please enter the IP Address of the primary Directory Server: 10.20.30.42
Would you like to add a secondary Directory Server? (y/n) y
Please enter the IP Address of the secondary Directory Server: 10.20.30.40
Would you like to configure any Accounting Server? (y/n) y
Please enter the IP Address of the primary Accounting Server: 10.20.30.42
Would you like to add a secondary Accounting Server? (y/n) y
Please enter the IP Address of the secondary Accounting Server: 10.20.30.40
Would you like to review or change any BES configuration? (y/n) n
Will you be adding/modifying Trusted Endpoints? (y/n) y
Would you like to add:
a) Single Trusted Endpoint
b) Range of Trusted Endpoint (contiguous range of IP Addresses)
a
Please enter the IP Address of the Trusted Endpoint
S S P
CRIPTS FOR A INGLE AIR OF
After you have answered the UMS script questions, the Call Processor
script and the SIP Downloader script ask these questions:
Enter y to specify the IP addresses on the other server, analog gateways,
and digital gateways as trusted endpoints.
At this point, add the IP addresses of any FXO analog gateways or digital
gateways. After you have added all gateways as trusted endpoints,
answer n to the final question to finish.
If you want to enter a range of trusted end point IP addresses, refer to
Appendix C, "Specifying a Range of Trusted End
in this chapter, trusted end points are specified one at a time, by entering
individual IP addresses.
S
ERVERS
Points". In the examples