Installation Scripts; Sample Network Parameters - 3Com VCX V7000 Installation And Maintenance Manual

Installation Scripts

Sample Network
Parameters
The installation scripts run when each server starts for the first time after
being shipped from 3Com Corporation. This section describes the scripts
and provides information to help you answer the questions.
In this section, the sample answers to the questions posed are based on
the networking assumptions listed next. Answer the questions using data
appropriate for your network.
Primary VCX Server IP Address (eth0): 10.20.30.40 (static)
■
Primary VCX Server IP Address (eth1): 10.20.30.41 (static)
■
Primary VCX Server Host Name: vcx01
■
CAUTION: Host names must be 11 characters or less.
Secondary VCX Server IP Address (eth0): 10.20.30.42 (static)
■
Secondary VCX Server IP Address (eth1): 10.20.30.43 (static)
■
Secondary VCX Server Host Name: vcx02
■
Primary UMS Server IP Address (eth0): 10.20.30.44 (static)
■
Primary UMS Server IP Address (eth1): 10.20.30.45 (static)
■
Primary UMS Server Host Name: vcxums01
■
Secondary UMS Server IP Address (eth0): 10.20.30.46 (static)
■
Secondary UMS Server IP Address (eth1): 10.20.30.47 (static)
■
Secondary UMS Server Host Name: vcxums02
■
Subnetwork Mask: 255.255.255.0
■
Gateway IP Address: 10.20.30.254
■
Primary DNS Server IP Address: 10.25.10.31
■
Secondary DNS Server IP Address: 10.26.10.31
■
Tertiary DNS Server IP Address: 10.27.10.31
■
DNS Search Path: yourcompany.com
■
Primary NTP Server IP Address: 10.35.10.51
■
Secondary NTP Server IP Address: 10.36.10.51
■
Continent: 2 (Americas)
■
Country: 44 (United States)
■
Time Zone: Eastern United States
■
Installation Scripts 57