Server) - 3Com VCX V7000 Installation And Maintenance Manual

74 C 3: I
HAPTER NSTALLATION
Sample Network and
Initial Configuration
Script (Primary UMS

Server)

Configure networking now? [yes] :
Enter system hostname [localhost] : vcxums01
---------- Configuring IP Interface 'eth0' ----------
Enter IP Address
Enter Network Subnet Mask
Enter Default Gateway Address
---------- Configuring IP Interface 'eth1' ----------
Enter IP Address
Enter Network Subnet Mask
Enter Default Gateway Address
---------- Configuring DNS Servers ----------
Enter DNS servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary DNS Server
Secondary DNS Server [192.168.1.2] : 10.26.10.31
Tertiary DNS Server
---------- Configuring DNS Search Path ----------
Press Enter to leave the current path unchanged, or specify
a new search path, with spaces separating each entry.
DNS Search Path []: yourcompany.com
---------- Configuring Network Time Protocol ----------
Enter NTP servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary NTP Server
Secondary NTP Server [192.168.1.252] : 10.36.10.51
S T S
CRIPTS FOR WO ERVER
This section contains a sample of the network and initial configuration
script that runs when the system is first started. The script displays the
current network settings and then asks you if you want to accept the
current networking parameters or configure them. Sample answers,
appropriate for the primary server, are provided in bold type along with
explanations of those answers. Explanations are in italics.
Network Configuration Script — Primary UMS Server
Press the Enter or Return key to accept yes as the suggested answer.
---------- Configuring Hostname ----------
[192.168.1.100
[255.255.255.0
[192.168.1.254
[192.168.1.100
[255.255.255.0
[192.168.1.254
[192.168.1.1] : 10.25.10.31
[0.0.0.0] : 0.0.0.0
[192.168.1.253] : 10.35.10.51
P
AIRS
] : 10.20.30.44
] : 255.255.255.0
] : 10.20.30.254
] : 10.20.30.45
] : 255.255.255.0
] : 10.20.30.254