3Com VCX V7000 Installation And Maintenance Manual page 71

Please choose the IP Address of the Call Processor from the following options:
a) 10.20.30.42
b) 10.20.30.43
c) none of the above
b
The Call Processor is configured to use the following IP: 10.20.30.43
Would you like to keep this address? (y/n)
y
Would you like to configure any Authentication Server? (y/n)
y
Please enter the IP Address of the primary Authentication Server:
10.20.30.42
Would you like to add a secondary Authentication Server? (y/n)
y
Please enter the IP Address of the secondary Authentication Server:
10.20.30.40
Would you like to configure any Directory Server? (y/n)
y
Please enter the IP Address of the primary Directory Server:
10.20.30.42
Would you like to add a secondary Directory Server? (y/n)
y
Please enter the IP Address of the secondary Directory Server:
10.20.30.40
Would you like to configure any Accounting Server? (y/n)
y
Please enter the IP Address of the primary Accounting Server:
10.20.30.42
Would you like to add a secondary Accounting Server? (y/n)
y
Please enter the IP Address of the secondary Accounting Server:
10.20.30.40
Would you like to review or change any BES configuration? (y/n)
n
Will you be adding/modifying Trusted Endpoints? (y/n)
y
Would you like to add:
a) Single Trusted Endpoint
b) Range of Trusted Endpoint (contiguous range of IP Addresses)
Initial VCX Configuration Script — Secondary VCX Server
At this point, add the IP addresses of the Ethernet adapters on the two
UMS servers and then add the IP addresses of any FXO analog gateways
or digital gateways. After you have added all gateways as trusted
endpoints, answer n to the final question to finish.
Installation Scripts 71
(continued)