98
C
5: I
HAPTER
NSTALLING
D
EVICES
VCX systems typically have two Call Processor servers. One is the primary
server and the other is the alternate server, which is available for fail-over
purposes.
6 Press # to save the new setting.
7 Press the Program button.
8 Press 6 (VCX Cnfig Menu).
9 Press 1 (Alt Dnld Servr).
10 Enter the IP address of the Alternate Call Processor Server.
11 Press # to save the new setting.
12 Connect the Ethernet data cable to the telephone.
13 Disconnect and reconnect the telephone power cord.
The telephone:
Obtains an IP address from a DHCP in your network.
■
Contacts the primary Call Processor server and begins to download
■
the appropriate software.
During the downloading process, several progress messages appear in
the telephone display panel. After the software has been downloaded to
the telephone, the message "Local Phone Number:" appears.
To log in on the telephone, a user enters:
An extension number, followed by #
■
A numeric password, followed by #
■
To assign a telephone extension to a user, you must configure the
telephone extension number and user ID using the VCX Administrator
User Interface. For information about how to perform these tasks, refer
to the VCX Administration Guide.