3Com VCX V7000 Installation And Maintenance Manual page 40

40 C 2: I
HAPTER NSTALLATION
IP Address for vcx02
IP Address for active
IP Address for standby
Intelligent Mirroring Alias? [active]
Is this host the primary or the secondary (P/S)? [P] :
VCX 7300 node configuration.
IP Address for Server vcx01?
Does this System support SMDI? (Y/N)? [N]
Should the system use the European date order (Y/N)?
Enter the Customer name? [customer] :
Would you like to edit the file containing your selections (Y/N)?
S S P
CRIPTS FOR A INGLE AIR OF
UMS Installation Script — Primary Server (continued)
[]? :10.20.30.42
[]? :10.20.30.51
[]? :10.20.30.52
Press the Enter or Return key to accept active as the suggested answer or
enter a name of your choice. Names must be 11 characters or less.
Press the Enter or Return key to accept P (primary) as the suggested
answer.
:10.20.30.40
Enter the IP address associated with the eth0 Ethernet adapter.
If the VCX system supports message waiting notification over serial lines,
press the Enter or Return key to accept the suggested answer. Otherwise,
enter y.
To use the US date order, press the Enter or Return key to accept the
suggested answer.
Optionally you can enter a customer name.
Press the Enter or Return key to accept the answers you have entered, or
enter y to see the questions again and modify one or more of your
answers.
After you accept the answers that you have entered, the UMS installation
script completes the installation of the UMS system on the primary VCX
server. The Call Processor and SIP Downloader script begins.
S
ERVERS
[N]:
End of UMS Installation Script — Primary Server
[N]: