3Com VCX V7000 Installation And Maintenance Manual page 78

78 C 3: I
HAPTER NSTALLATION
IP address of the secondary proxy? (hit Enter if none) [
Intelligent Mirroring configurations
Should Intelligent Mirroring be enabled (Y/N)?
Enter the Device Name of the Network Card to be used by UMS?
Enter the Device Name of the Second Network Card to be used by UMS, press ENTER
if only one? :eth0
Name of the Remote Intelligent Mirrored System?
IP Address for vcxums02 []?
IP Address for active
IP Address for standby
Is this host the primary or the secondary (P/S)? :P
VCX 7300 node configuration.
IP Address for Server vcxums01?
Does this System support SMDI (Y/N)?
Should the system use the European date order (Y/N)?
Enter the Customer name? [customer] :
Would you like to edit the file containing your selections (Y/N)?
S T S
CRIPTS FOR WO ERVER
UMS Installation Script — Primary UMS Server (continued)
Enter the IP address of the secondary VCX Call Processor server
(10.20.30.42 in this sample configuration that contains two server pairs
of servers).
All supported UMS configurations require Intelligent Mirroring. Enter y.
All VCX servers have two network cards. When UMS is configured to run
on separate servers from the Call Processor and back end servers, it uses
both cards. To answer this question, enter the name of the second card,
eth1.
To answer this question, enter the name of the second card, eth0.
:10.20.30.46
Enter the IP address of eth0 on the vcxums02 server.
[]? :10.20.30.48
[]? :10.20.30.50
:10.20.30.44
[N]:
If the VCX system supports message waiting notification over serial lines,
press the Enter or Return key to accept the suggested answer. Otherwise,
enter y.
To use the US date order, press the Enter or Return key to accept the
suggested answer.
Optionally you can enter a customer name.
End of UMS Installation Script — Primary UMS Server
P
AIRS
[N]:Y
:vcxums02
[N]:
] 10.20.30.42
:eth1
[N]:n