3Com VCX V7000 Installation And Maintenance Manual page 63

Enter the hostname of the Authentication Database [localhost]: vcx01
Enter the hostname of the Directory Database [vcx01]:
Starting the 3Com Call Processor configuration...
Please choose the IP Address of the Call Processor from the following options:
a) 10.20.30.40
b) 10.20.30.41
c) none of the above
b
The Call Processor is configured to use the following IP: 10.20.30.41
Would you like to keep this address? (y/n)
y
Will you be configuring the Back-End Servers used by the Call Processor? (y/n)
y
Would you like to configure any Authentication Server? (y/n)
y
Please enter the IP Address of the primary Authentication Server:
10.20.30.40
Would you like to add a secondary Authentication Server? (y/n)
y
Please enter the IP Address of the secondary Authentication Server:
10.20.30.42
Would you like to configure any Directory Server? (y/n)
y
Please enter the IP Address of the primary Directory Server:
10.20.30.40
Would you like to add a secondary Directory Server? (y/n)
y
Please enter the IP Address of the secondary Directory Server:
10.20.30.42
Would you like to configure any Accounting Server? (y/n)
y
Please enter the IP Address of the primary Accounting Server:
10.20.30.40
Would you like to add a secondary Accounting Server? (y/n)
y
Initial VCX Configuration Script — Primary VCX Server (continued)
Choose the IP address associated with the eth1 Ethernet adapter.
Enter the IP address associated with eth0 on the Primary VCX (non-UMS)
server.
Enter the IP address associated with eth1 on the Primary VCX (non-UMS)
server.
Installation Scripts 63