Server) - 3Com VCX V7000 Installation And Maintenance Manual

58 C 3: I
HAPTER NSTALLATION
Sample Network and
Initial Configuration
Script (Primary VCX

Server)

Configure networking now? [yes] :
Press the Enter or Return key to accept yes as the suggested answer.
---------- Configuring Hostname ----------
Enter system hostname [localhost] : vcx01
---------- Configuring IP Interface 'eth0' ----------
Enter IP Address
Enter Network Subnet Mask
Enter Default Gateway Address
---------- Configuring IP Interface 'eth1' ----------
Enter IP Address
Enter Network Subnet Mask
Enter Default Gateway Address
---------- Configuring DNS Servers ----------
Enter DNS servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary DNS Server
Secondary DNS Server [192.168.1.2] : 10.26.10.31
Tertiary DNS Server
---------- Configuring DNS Search Path ----------
Press Enter to leave the current path unchanged, or specify
a new search path, with spaces separating each entry.
DNS Search Path []: yourcompany.com
---------- Configuring Network Time Protocol ----------
Enter NTP servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary NTP Server
Secondary NTP Server [192.168.1.252] : 10.36.10.51
S T S
CRIPTS FOR WO ERVER
This section contains a sample of the network configuration script that
runs when the system is first started. The script displays the current
network settings and then asks you if you want to accept the current
networking parameters or configure them. Sample answers, appropriate
for the primary server, are provided in bold type along with explanations
of those answers. Explanations are in italics.
Network Configuration Script — Primary VCX Server
[192.168.1.100
[255.255.255.0
[10.20.30.254
[192.168.1.100
[255.255.255.0
[10.20.30.254
[192.168.1.1] : 10.25.10.31
[0.0.0.0] : 0.0.0.0
[192.168.1.253] : 10.35.10.51
P
AIRS
] : 10.20.30.40
] : 255.255.255.0
] : 10.20.30.254
] : 10.20.30.41
] : 255.255.255.0
] : 10.20.30.254