Standard Drive Control - Siemens SINAMICS G120 Operating Instructions Manual

5.3.4

Standard Drive Control

6.
7.
8. Enter the motor data:
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Motor standard
KW 50HZ
HP 60HZ
KW 60HZ
Supply voltage for the inverter
8.1.
8.2.
8.3.
8.4.
8.5.
8.6.
8.7.
8.8.
5.3 Quick commissioning using the BOP-2 operator panel
IEC
NEMA
IEC 60 Hz
Motor type
Depending on the particular inverter, it is possible that the
BOP-2 does not list all of the following motor types.
INDUCT Third-party induction motor
SYNC Third-party synchronous motor
RELUCT Third-party reluctance motor
1L... IND 1LE1, 1LG6, 1LA7, 1LA9 induction motors
1LE1 IND 1LE1☐9 with motor code on the rating plate
100
1PC1 IND 1PC1 with motor code on the rating plate
1PH8 IND Induction motor
1FP1 Reluctance motor
1F... SYN 1FG1, 1FK7 synchronous motor, without encoder
If you have selected a motor type > 100, then you must enter
the motor code:
With the correct motor code, the inverter assigns the motor
data the following values.
If you do not know the motor code, then you must set the mo-
tor code = 0, and enter the motor data from p0304 and on-
wards from the rating plate.
87 Hz motor operation
The BOP-2 only displays this step if you previously selected
IEC as the motor standard (EUR/USA, P100 = KW 50HZ).
Rated voltage
Rated current
Rated power
Rated frequency
Rated speed
Commissioning
135