6.8.3.3
Configuring a safety function
Procedure with STARTER
To configure the safety functions, proceed as follows:
1. Go online.
2. Select the "Safety Integrated" function
3. Select "Change settings".
4. Select "STO via terminal":
You have completed the following commissioning steps:
● You have started to commission the safety functions.
● You have selected the basic functions with control via onboard terminals of the inverter.
The other selection options are described in the "Safety Integrated" function manual.
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Overview of the manuals (Page 507)
Advanced commissioning
6.8 Safe Torque Off (STO) safety function
331