Dimensioned Drawings, Drilling Dimensions For The Pm340 Power Module - Siemens SINAMICS G120 Operating Instructions Manual

Installing
4.4 Installing Power Modules
4.4.10

Dimensioned drawings, drilling dimensions for the PM340 Power Module

The following dimensioned drawings and drilling patterns are not to scale.
Image 4-1
The Power Modules can be mounted and operated side-by-side. For tolerance reasons, we
recommend a lateral clearance of approx. 1 mm.
Cooling clearances and fastening
● Top cooling clearance: 100 mm
● Bottom cooling clearance:
● Front cooling clearance:
● For fastening:
Depth with Control Unit and Operator Panel
• with Control Unit:
• With Control Unit and blanking cover / BOP-2:
• With Control Unit and IOP:
76
Mounting dimensions and drilling dimensions (mm)
100 mm
65 mm
2 x M4 / 2.5 Nm
186 mm
197 mm
208 mm
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC