2.5
Drive control panel
The drive control panel (see Chapter "Using the control panel (Page 105)") is used to control
and monitor individual drives. You traverse drives with the control panel by specifying values.
Depending on the operating mode, these are, for example, speed setpoints.
The following figure shows the various components of the control panel:
①
②
③
④
⑤
⑥
⑦
⑧
Figure 2-11
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Activate/deactivate master control
Switch infeed on and off
Set drive enable
Select operating mode
Drive ON/OFF
Control drive
Drive status
Actual values
Control panel
Startdrive commissioning tool
2.5 Drive control panel
43