Siemens SINAMICS G120 Operating Instructions Manual page 109

Default setting 12: "Standard I/O with analog setpoint"
DO 0: p0730,
DO 1: p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: Std ASP
Default setting 13: "Standard I/O with analog setpoint and safety"
DO 0: p0730,
DO 1: p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: ASPS
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
AO 0: p0771[0], AO 1: p0771[1] DI 0: r0722.0, ..., DI 2: r0722.2
AO 0: p0771[0], AO 1: p0771[1] DI 0: r0722.0, ..., DI 5: r0722.5
Installing
4.6 Installing Control Unit
AI 0: r0755[0]
AI 0: r0755[0]
109