Power Module; Power Modules In Degree Of Protection Ip20 And With Push-Through System - Siemens SINAMICS G120 Operating Instructions Manual

3.3

Power Module

Important data on the Power Modules is provided in this section. Further information is
contained in the Hardware Installation Manual of the Power Module.
All power data refers to rated values or to power for operation with low overload (LO).
Which Power Module can I use with the Control Unit?
Table 3- 5
Control Unit
CU240B-2...
CU240E-2...
3.3.1

Power Modules in degree of protection IP20 and with push-through system

Image 3-2
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Overview of the manuals (Page 507)
Permitted combinations of Control Unit and Power Module
PM340 1AC
IP20 and push-
through system
---
✓
Examples of Power Modules with degree of protection IP20
Power Module
PM230 PM240
IP55
✓ --- ✓
✓ ✓ ✓
Description
3.3 Power Module
PM240-2 PM250 PM260
✓ ✓
✓ ✓
✓
✓
31