The Device Trace In Starter - Siemens SINAMICS G120 Operating Instructions Manual

Appendix
A.4 The device trace in STARTER
A.4

The device trace in STARTER

Description
The device trace graphically displays inverter signals with respect to time.
Signals
In two settings that are independent of one another, using
signals each.
Recording
You can start a measurement as frequently as you require. As long as you do not exit
START, the results remain under the "Measurements" tab with data and time. When
terminating STARTER or under the "Measurements" tab, you can save the measurement
results in the *.trc format.
492
you can interconnect eight
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC