Siemens SINAMICS G120 Operating Instructions Manual page 136

Commissioning
5.3 Quick commissioning using the BOP-2 operator panel
9.
10.
11.
12.
13.
14.
15.
136
8.9.
Select the application:
VEC STD
PUMP FAN Speed-dependent load: Typical applications include
Select the default setting for the interfaces of the inverter that is suita-
ble for your application.
Minimum and maximum motor speed
Motor ramp-up time
Motor ramp-down time
Ramp-down time for the OFF3 command
Motor cooling
SELF Natural cooling
FORCED Forced-air cooling
LIQUID Liquid cooling
NO FAN Without fan
Constant load: Typical applications include belt conveyor
drives.
pumps and fans.
Default settings of the CU240B-2 interfaces (Page 97)
Default settings of the CU240E-2 interfaces (Page 104)
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC