Siemens SINAMICS G120 Operating Instructions Manual page 148

Commissioning
5.4 Quick commissioning with a PC.
5. Press the "Accessible nodes" button.
Image 5-4
Image 5-5
6. When the USB interface is appropriately set, then the "Accessible nodes" screen form
shows the inverters that can be accessed.
Image 5-6
Image 5-7
If you have not correctly set the USB interface, then the following "No additional nodes
found" message is displayed. In this case, follow the description below.
148
"Accessible nodes" in STARTER
"Accessible nodes" in Startdrive
Inverters found in STARTER
Inverters found in Startdrive
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC