Ip Igmp Snooping Multi-Vlan-Config - TP-Link T2500G-10TS Cli Reference Manual

the multicast groups. Leave Time ranges from 1 to 30 in seconds. By default,
it is 1.
port-list
ip
—— The static multicast IP address.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the IGMP Snooping function and modify Router Port Time as 300
seconds, Member Port Time as 200 seconds for VLAN 1-3, and set the router
port as 1/0/1 for VLAN 1-2:
T2500G-10TS(config)# ip igmp snooping vlan-config 1-3 rtime 300
T2500G-10TS(config)# ip igmp snooping vlan-config 1-3 mtime 200
T2500G-10TS(config)# ip igmp snooping vlan-config 1-2 rport interface
gigabitEthernet 1/0/1
Add static multicast IP address 225.0.0.1, which corresponds to VLAN 2, and
configure the forward ports as ports 1/0/1-3:
T2500G-10TS(config)# ip igmp snooping vlan-config 2 static 225.0.0.1
interface gigabitEthernet 1/0/1-3
31.7

ip igmp snooping multi-vlan-config

Description
The ip igmp snooping multi-vlan-config command is used to create
Multicast VLAN. To delete the corresponding Multicast VLAN, please use no
ip igmp snooping multi-vlan-config command. To restore the default values,
please use no ip igmp snooping multi-vlan-config with specified
parameters.
Syntax
ip igmp snooping multi-vlan-config [
member-time
—— The list of Ethernet ports.
leave-time
| ltime
253
vlan-id
] [ rtime
| rport interface gigabitEthernet
router-time
| mtime
port-list
]