Enable Authentication(Telnet) - TP-Link T2500G-10TS Cli Reference Manual

Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the login authentication method list on the ssh terminal line as
"list1":
T2500G-10TS(config)# line ssh
T2500G-10TS(config-line)# login authentication list1

35.24 enable authentication(telnet)

Description
The enable authentication command is used to apply the privilege
authentication method list to the telnet terminal line. To restore to the default
authentication method list, please use the no enable authentication
command.
Syntax
enable authentication {
no enable authentication
Parameter
method-list
"default" by default, which contains the method "none".
Command Mode
Line Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the enable authentication method list on the telnet terminal line as
"list2":
T2500G-10TS(config)#line telnet
T2500G-10TS(config-line)# enable authentication list2
method-list
—— Specify the enable method list on the telnet terminal line. It is
340
}