Gvrp Registration - TP-Link T2500G-10TS Cli Reference Manual

no gvrp
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the GVRP function for Gigabit Ethernet ports 1/0/2-6:
T2500G-10TS(config)#interface range gigabitEthernet 1/0/2-6
T2500G-10TS(config-if-range)#gvrp
9.3

gvrp registration

Description
The gvrp registration command is used to configure the GVRP registration
type for the desired port. To restore to the default value, please use no gvrp
registration command.
Syntax
gvrp registration { normal | fixed | forbidden }
no gvrp registration
Parameter
normal | fixed | forbidden —— Registration mode. By default, the registration
mode is "normal".
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
61