Description - TP-Link T2500G-10TS Cli Reference Manual

Syntax
interface range gigabitEthernet
Parameter
port-list
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
User Guidelines
Command in the Interface Range gigabitEthernet Mode is executed
independently on all ports in the range. It does not affect the execution on the
other ports at all if the command results in an error on one port.
Example
To enter the Interface range gigabitEthernet Configuration Mode, and
configure ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one
port-list:
T2500G-10TS(config)# interface range gigabitEthernet
1/0/1-3,1/0/6-7,1/0/9
23.3

description

Description
The description command is used to add a description to the Ethernet port.
To clear the description of the corresponding port, please use no
description command.
Syntax
description
no description
Parameter
string
—— The list of Ethernet ports.
string
—— Content of a port description, ranging from 1 to 16 characters.
port-list
180