Chapter 36 DHCP Relay Commands
A DHCP Relay is a device that forwards DHCP packets between clients and servers. DHCP
Relay forward requests and replies between clients and servers when they are not on the same
physical subnet.
36.1
ip dhcp relay
Description
The ip dhcp relay command is used to enable DHCP Relay function globally.
To disable DHCP Relay function, please use no ip dhcp relay command.
Syntax
ip dhcp relay
no ip dhcp relay
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable DHCP Relay function globally:
T2500G-10TS(config)# ip dhcp relay
36.2
ip dhcp relay information option
Description
The ip dhcp relay information option command is used to enable option 82
support in DHCP Relay. To disable this function, please use no ip dhcp relay
information option command.
Syntax
ip dhcp relay information option
no ip dhcp relay information option
344