Ip Http Secure-Max-Users - TP-Link T2500G-10TS Cli Reference Manual

Parameter
[ 3des-ede-cbc-sha ] [ rc4-128-md5 ] [ rc4-128-sha ] [ des-cbc-sha ] ——
Specify the encryption algorithm and the digest algorithm to use on an SSL
connection. By default, the switch supports all these ciphersuites.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the ciphersuite to be used for encryption over the SSL connection
as 3des-ede-cbc-sha:
T2500G-10TS(config)# ip http secure-ciphersuite 3des-ede-cbc-sha
12.7

ip http secure-max-users

Description
The ip http secure-max-users command is used to configure the maximum
number of users that are allowed to connect to the HTTPs server. To cancel
this limitation, please use no ip http secure-max-users command.
Syntax
ip http secure-max-users
no ip secure-max-users
Parameter
admin-num
server as Admin, ranging from 1 to 16. The total number of Admin and Guest
should be less than 16.
guest-num
server as Guest, ranging from 0 to 15.The total number of Admin and Guest
should be less than 16.
Command Mode
Global Configuration Mode
admin-num guest-num
—— The maximum number of the users logging on to the HTTPs
—— The maximum number of the users logging on to the HTTPs
87