Table of Contents
Advertisement
encrypted password is configured, you should use the corresponding
unencrypted password if you re-enter this mode.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
If the password you configured here is unencrypted and the global
encryption function is enabled in
password in the configuration file will be displayed in the symmetric
encrypted form.
Example
Add and enable a new admin user named "tplink", of which the password is
"admin" and unencrypted:
T2500G-10TS(config)#user name tplink privilege admin password 0 admin
11.2
user name (secret)
Description
The user name command is used to add a new user or modify the existed
users' information. To delete the existed users, please use no user name
command. This command uses the MD5 encryption.
Syntax
user name
password
no user name
Parameter
name
composed of digits, English letters and under dashes only.
admin | operator | power_user | user —— Access level. "admin" means that
you can edit, modify and view all the settings of different functions. "operator"
means that you can edit, modify and view most of the the settings of different
functions. "power-user" means that you can edit, modify and view some of
name
[ privilege admin | operator | power_user | user ] secret { [ 0 ]
encrypted-password
| 5
name
——Type a name for users' login, which contains 16 characters at most,
service
password-encryption, the
}
72
Hide quick links:
Advertisement
Table of Contents
