Ip Dhcp Relay Information Remote-Id - TP-Link T2500G-10TS Cli Reference Manual

Parameter
circuitID
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the circuit ID as "TP-Link":
T2500G-10TS(config)# ip dhcp relay information circuit-id TP-Link
36.6

ip dhcp relay information remote-id

Description
The ip dhcp relay information remote-id command is used to specify the
custom remote ID when option 82 customization is enabled. To clear the
remote ID, please use no ip dhcp relay information remote-id command.
Syntax
ip dhcp relay information remote-id
no ip dhcp relay information remote-id
Parameter
remoteID
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the remote ID as "TP-Link":
T2500G-10TS(config)# ip dhcp relay information remote-id TP-Link
—— Specify the circuit ID, ranging from 1 to 63 characters.
—— Specify the remote ID, ranging from 1 to 63 characters.
347
remoteID