Show Aaa Authentication - TP-Link T2500G-10TS Cli Reference Manual

Parameter
method
supported, and the default method is server group "radius".
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the default 802.1X accounting method as "radius1":
T2500G-10TS(config)# aaa accounting dot1x default radius1

35.15 show aaa authentication

Description
This show aaa authentication command is used to display the summary
information of the authentication login, enable and dot1x metheod list.
Syntax
show aaa authentication [ login | enable | dot1x ]
Parameter
login | enable | dot1x —— Specify the method list type.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the information of all the authentication method lists:
T2500G-10TS(config)# show aaa authentication
—— Specify the method name. Only RADIUS server group is
334