T2500G-10TS(config)#
max-response-time 10
32.18 ipv6 mld snooping querier vlan query-interval
Description
The ipv6 mld snooping querier vlan query-interval command is used to
specify the interval to send the Query Message. The default value is 25
seconds. To restore the default value, please use no ipv6 mld snooping
querier vlan query-interval command.
Syntax
ipv6 mld snooping querier vlan
no ipv6 mld snooping querier vlan
Parameter
vlan-id
to 4094.
interval
ranging from 2 to 300.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the interval to send the Query Message as 10s on VLAN 2:
T2500G-10TS(config)# ipv6 mld snooping querier vlan 2 query-interval 10
32.19 ipv6 mld snooping querier vlan query-source
Description
The ipv6 mld snooping querier vlan query-source command is used to
specify the source address which sends the Query message. The default
value is FE80::02FF:FFFF:FE00:0001. To restore the default value, please use
no ipv6 mld snooping querier vlan query-source command.
Syntax
ipv6 mld snooping querier vlan
ipv6
——The VLAN that enables the MLD Querier function, ranging from 1
—— Specify the interval to send the Query message in seconds,
278
mld
snooping
vlan-id
query-interval
vlan-id
query-interval
vlan-id
query-source
querier
vlan
interval
ipv6-addr
2