Aaa Authentication Enable - TP-Link T2500G-10TS Cli Reference Manual

35.12 aaa authentication enable

Description
This aaa authentication enable command is used to configure a privilege
authentication method list. A method list describes the authentication
methods and their sequence to elevate a user's privilege. To delete the
specified authentication method list, please use the no aaa authentication
enable command.
Syntax
aaa authentication enable {
method4
[
no aaa authentication enable
Parameter
method-list
method1, method2, method3, method4
methods in order. The next authentication method is tried only if the previous
method does not respond, not if it fails.
The preset methods include radius, tacacs, local and none. "radius" means
the RADIUS server group "radius"; "tacacs" means the RACACS+ server
group "tacacs"; "local" means local username database are used; "none"
means no authentication is used for privilege elevation.
Users can aslo define new method with the
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
By default the enable authentication method is "default" with "none" as
method1.
Example
Configure a privilege authentication method list "list2" with the priority1
method as radius and priority2 method as local:
T2500G-10TS(config)# aaa authenticaiton enable list2 radius local
method-list
]
method-list
—— Specify the method list name.
332
method1 method2
} { } [
—— Specify the authentication
aaa group
command.
method3
] [ ]