Login Local; Media-Type Rj45 - TP-Link T2500G-10TS Cli Reference Manual

T2500G-10TS(config-line)#login
Configure the login of virtual terminal connection 0-5 as login mode:
T2500G-10TS(config)#line vty 0 5
T2500G-10TS(config-line)#login
11.9

login local

Description
The login local command is used to configure the login mode of the switch
which uses the user name and password to login.
Syntax
login local
Command Mode
Line Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the login of virtual terminal connection 0-5 as login local mode:
T2500G-10TS(config)#line vty 0 5
T2500G-10TS(config-line)#login local
Configure the login of Console port connection 0 as login local mode:
T2500G-10TS(config)#line console 0
T2500G-10TS(config-line)#login local

11.10 media-type rj45

Description
The media-type rj45 command is used to configure the console media type
as RJ-45 for input. The switch has two console ports available —— an RJ-45
console port and a micro-USB console port. Console input is active on only
one console port at a time. By default, the micro-USB connector takes
precedence over the RJ-45 connector, which means that, when both the
79