Show Spanning-Tree Active; Show Spanning-Tree Bridge - TP-Link T2500G-10TS Cli Reference Manual

29.22 show spanning-tree active

Description
The show spanning-tree active command is used to display the active
information of spanning-tree.
Syntax
show spanning-tree active
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the active information of spanning-tree:
T2500G-10TS(config)# show spanning-tree active

29.23 show spanning-tree bridge

Description
The show spanning-tree bridge command is used to display the bridge
parameters.
Syntax
show spanning-tree bridge [ forward-time | hello-time | hold-count | max-age
| max-hops | mode | priority | state ]
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the bridge parameters:
T2500G-10TS(config)# show spanning-tree bridge
240