Ip Ssh Algorithm - TP-Link T2500G-10TS Cli Reference Manual

Parameter
v1 | v2 —— The SSH protocol version to be enabled. They represent SSH v1
and SSH v2 respectively.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable SSH v2:
T2500G-10TS(config)# ip ssh version v2
19.3

ip ssh algorithm

Description
The ip ssh algorithm command is used to configure the algorithm in SSH
function. To disable the specified algorithm, please use no ip ssh algorithm
command.
Syntax
ip ssh algorithm { AES128-CBC | AES192-CBC | AES256-CBC | Blowfish-CBC
| Cast128-CBC | 3DES-CBC | HMAC-SHA1 | HMAC-MD5 }
no ip ssh algorithm
Parameter
AES128-CBC | AES192-CBC | AES256-CBC | Blowfish-CBC | Cast128-CBC |
3DES-CBC | HMAC-SHA1 | HMAC-MD5 —— Specify the SSH algorithm.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the SSH algorithm as AES128-CBC:
T2500G-10TS(config)# ip ssh algorithm AES128-CBC
140